Compatible Batteries: IDX V-Mount lithium-ion batteries
Battery Positions: 2
When using two batteries, use batteries of the same rated capacity.
Output Voltage: Unregulated DC (battery voltage)
Maximum Output Current: 10A per output connector (20A total)
Output Connectors: 2 × 4-pin XLR
Pin 1: Negative (–)
Pin 2,3: NC:Pin 4: Positive (+)
Battery Over-Discharge Protection: Output automatically shuts off when the voltage drops to 12V or below
Alarm LED Indicators: Green (Solid): 14V or higher (Normal)
Red (Solid): Below 14V and above 12V (Low battery warning)
Off: 12V or below (Output stopped)
Dimensions: 3.54(W) × 8.06(H) × 4.31(D) inches
Weight 2.21 lbs

EB-2A

Price: $659.00
Adding… Item added

2-Position Power Base Station

Description

The EB-2A is a V-Mount battery power base station designed to provide extended operating time and high-power output. It accommodates two IDX V-Mount lithium-ion batteries and features two 4-pin XLR output connectors, each supporting a maximum output current of 10A (20A total), allowing two devices to be powered simultaneously.

An alarm LED indicates the output voltage status, showing green at 14V or higher and red below 14V. When the voltage drops to 12V or lower, the LED turns off and the power output is automatically shut off to prevent battery over-discharge.

 

Notes)
- When using two batteries, use batteries of the same rated capacity.
-
Actual output current may be limited by the maximum discharge capability of the connected batteries.
- When operating with only one battery, such as during battery replacement, the battery's overcurrent protection may activate and interrupt the power output. Do not exceed the maximum discharge current of the battery.

Resources

Operation Manual
Technical Specifications